LiftPlan AI

0

Lift Plans

0

Approved

0

Pending

0

Rejected

0

Equipment Expired

Lift Plans

Plan No.	Client	Date	Category	Status	Utilization

General Information

Lift Environment *

Lift Plan Number *

Lift Plan Number is required.

Client Name

Project Name

Location

Date of Lift *

Date is required.

Prepared By

Work Description *

Work Description is required — this will feed the JSA and Method Statement.

Onshore selected — Crane Type auto-set to Mobile Crane, and Section 04 will ask Ground Conditions questions.

Load Details

Load Description

Load Weight (t) *

Load Weight cannot be zero or negative.

Dimension Unit

Length (m)

Width (m)

Height (m)

No. of Lifting Points *

Must be at least 1.

Lifting Point Type

Center of Gravity (COG) — Auto-Calculated

COG X (along length)—

COG Y (along width)—

COG Z (height)—

Enter Length, Width, Height above.

Irregular load — enable manual COG override

Crane Selection

Crane Type (auto-set by Lift Environment)

Crane Make & Model

Boom Length (m)

Working Radius (m)

Crane Capacity at Radius (t) *

Crane Capacity cannot be zero.

Rigging Weight (t)

Hook Block Weight (t)

Crane Utilization Check

0%

Utilization

Load Weight0.00 t

+ Rigging Weight0.00 t

+ Hook Block Weight0.00 t

= Total Lift Weight0.00 t

Crane Capacity at Radius0.00 t

Utilization %0%

Remaining Capacity0.00 t

Result—

Enter load weight and crane capacity to calculate.

Sling Angle Calculator

Number of Sling Legs

Sling Length (per leg, m) *

Sling Length must be greater than the horizontal distance.

Center to Lift Point Distance (m)

Sling Angle (from horizontal)—

Vertical Height (derived)—

Sling Tension (per leg)—

Required WLL (per leg)—

Enter sling length and center-to-lift-point distance to calculate.

Sling, Shackle & Master Link Selection

Sling Type

Sling WLL (t) *

Shackle Type & Size

Shackle WLL (t) *

Master Link Type & Size

Master Link WLL (t) *

Sling WLL Check

—

Shackle WLL Check

—

Master Link WLL Check

—

Offshore / Marine Conditions

Sea State (Douglas Scale)

Significant Wave Height (m)

Wave Period (s)

Current Speed (kn)

Wind Speed (kn)

Crane / Vessel Wind Limit (kn) *

Dynamic Lift Load & Weather Window

Dynamic Amplification Factor (DAF)—

Dynamic Lift Load (Load × DAF)—

Wind vs. Operating Limit—

DAF is a conservative placeholder based on sea state — not a substitute for a DNV-RP-H103 engineering calculation. Confirm against your company's approved offshore lift procedure before a critical lift.

Enter wind speed and limit to get a GO / WARNING / NO GO read.

Ground Conditions & Site Access

Ground Bearing Capacity Confirmed? *

Underground Utilities Checked? *

Access Route Condition

Overhead Power Lines Nearby? *

Weather (Onshore/Shipyard)

Wind Speed (kn)

Site Wind Limit (kn)

Confirm ground conditions and access above.

Risk Assessment

Method Statement Summary (manual in v1.0)

Sequence of Operations

Rigging Equipment Register

Lift Plan AI Checker

Lifting Incident & Near-Miss Library Independent module — not part of the lift plan workflow